How To Replace Hot Water Valve In Shower

Remove old valve and choose new valve to put in a new shower valve you ll first need to remove the old one from inside your shower.

How to replace hot water valve in shower. See below for a shopping list tool. Turn the screws on the shut off valves to the right to stop the flow of water. That being said there are options and jeff explores diy.

This old house plumbing and heating expert richard trethewey fixes a faulty shower valve with new valve stems and seats. To replace a shower valve start by unscrewing the shower handle and trim plate so you can remove them. Remove the cap from the valve by unscrewing the brass screw from each side of the valve.

If the water doesn t get hot you ll need to readjust the cartridge with the plastic nut tool and check again until you get hot water. Regardless of skill level there are different ways to do everything shower plumbing is no different. 6 put the small spacer washer back onto the shaft.

Insert the new valve stem into the socket insert the metal clip or spring and attach the bonnet nut. Unscrew and remove the handle. Temporarily mount the faucet knob on the shaft.

Slide the stop tube back onto the valve body. Ensure that the valve stem is seated in the correct position. Use a utility knife to remove the protective cap from the shower valve handle.

Using needlenose pliers remove the valve clip and pull the valve out of the wall. Unscrew and remove the plate from the shower wall.