Eyewash And Safety Shower Requirements

Eye wash stations safety showers guidelines purpose these guidelines support the health and safety policy and provide assistance on the application of australian standard 4775 2007 emergency eye wash and shower equipment in relation to assessing the type and requirements of the equipment within a particular area of the university.
Eyewash and safety shower requirements. Eyewash and shower requirements ansi z358 1 2014 requirements that apply to both eyewash units and shower units the sole purpose must be as an eyewash or emergency shower unit. Both safety showers and eyewash stations must be able to provide the recommended flow for at least 15 minutes. Workers use eyewashes face washes and showers to flush chemicals and debris out of their eyes and off their bodies.
Osha refers employers to the american national standards institute ansi and the international safety equipment association isea ansi isea. The selection of emergency eyewash and shower equipment is often a complicated process. A common reference point when selecting emergency equipment is ansi isea z358 1 emergency eyewash and shower equipment.
In addition to addressing design and engineering issues specifiers must be aware of regulatory requirements and compliance standards. The occupational safety and health administration osha requires eyewashes and emergency showers for workers who could be exposed to corrosive chemicals in the workplace. This usually translates into having the equipment plumbed in with hard connections to the water supply.
Osha regulations address emergency eyewash and shower equipment in 29 cfr 1910 151. How eyewash and emergency showers help prevent long term worker injuries. If none of the materials used in this work area is an injurious corrosive chemical as indicated by the material safety data sheet msds for each product then an emergency eyewash or.
With osha fine increases of 80 percent taking effect in august 2016 violations for inappropriate or inadequate eyewash and. For example a quick calculation for the safety shower at 20 gpm yields 300 gallons needed. As the standard states an eyewash and or safety shower would be required where an employee s eyes or body could be exposed to injurious corrosive materials.
Where the eyes or body of any person may be exposed to injurious corrosive materials suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use. Emergency eyewashes and showers 7 february 2017 checklist. This usually translates into having the equipment plumbed in with hard connections to the water supply.